Item Description

Moveable Diesel Motor air cooling ac Compressor

Our Diesel motor sort transportable screw air compressor


    Commonly utilized in mining, water conservancy, transportation, shipbuilding, city design, power, military and other industries, and properly gained by customers for higher effectiveness, vitality conserving, protected and secure, in line with the demands of environmental security equipment.
Goods contain diesel driven type CZPT device, motor driven variety CZPT equipment, electricity range of 33-348KW, exhaust air ability of 35m3/min, exhaust stress up to 35Bar.


1.  Diesel motor:Large performance and power preserving, safety, sturdiness, electricity reserve adequate, undertake CZPT manufacturers of Cummings engine. Comply with Euro II emission requirements, and the EU E – mark standard emission certification.

two. Adopt twin rotor/screw air stop for compression air.
Have Features of Strong electricity, Protection and stability, Inexpensive and environmental friendly.

three. Cooling system
Undertake substantial overall performance plate fin framework, can use in high temperature environment, can run for a lengthy time at -20-fifty incredibly cold or hot climates,  and with protection defense protect.

4. Movable technique
☆ Undertake adjustable height and rotatable supporting legs, very ideal for out of doors area operation below various working conditions.
☆ Heavy duty equipment with 4 wheels, with large shock absorption, a lot more flexible.

five. Data security
Outfitted with monitoring technique, can check device operation position in any time.
With number of knowledge exhibit, checking and alarm quit purpose.

6. Superior waterproof and dust proof purpose
Device management, every accessibility doorway and the unit group of vertical plate, all adopt rainproof and dustproof style, avoid the entry of rain or dust, drastically boost the security stage.

7. Adopt scientific technological innovation to accomplish sound absorption and shock absorption, can procedure beneath low sounds.
8. Can fulfill the software of altitude earlier mentioned 4500m,  temperature of as large as 55 degrees C, and severe environment of 55% oxygen articles.

9. Straightforward servicing.

Complex parameter of Movable screw air compressor ( driven by diesel engine):

Product Air displacemen (m3/min) Exhause strain (Mpa) Electricity (Kw) Outlet pipe dimension Dimensions (mm) Fat (Kg)
LGCY-6/13F 6 one.3 70 2-G1 1-G2 2640*1550*1960 1700
LGCY-7/10F 7 1 70 2-G1 1-G2 2640*1550*1960 1700
LGCY-8/8F 8 .eight 70 2-G1 1-G2 2640*1550*1960 1700
LGCY-eleven/13F 11 1.3 118 2-G1 1-G2 2640*1550*1960 2300
LGCY-twelve.3/10F 12.3 one 118 two-G1 1-G2 2640*1550*1960 2300
LGCY-thirteen/8F thirteen .eight 118 2-G1 1-G2 2640*1550*1960 2300
LGCY-thirteen/13F 13 1.three 132 two-G1 1-G2 3500*2000*2040 2500
LGCY-fourteen/12F fourteen 1.2 132 2-G1 1-G2 3500*2000*2040 2500
LGCY-seventeen/8F seventeen .8 132 2-G1 1-G2 3500*2000*2040 2500
LGCY-twenty/7F twenty .7 145 2-G1 1-G2 3500*2000*2040 4400
LGCY-20/15F 20 1.five 264 two-G1 1-G2 4300*2100*2700 4400
LGCY-26/20F 26 two 288 2-G1 1-G2 4300*2100*2700 4400
LGCY-21/13F 21 one.three 250 two-G1 1-G2 4300*2100*2700 4400
LGCY-twenty five/10F twenty five one 250 2-G1 1-G2 4300*2100*2700 4400
LGCY-eighteen/17F eighteen 250 2-G1 1-G2 4300*2100*2700 4400
LGCY-25/20F twenty five two 264 2-G1 1-G2 4300*2100*2700 5500


Technological parameter of Movable screw air compressor ( driven by electrical motor):

Model Air displacemen (m3/min) Exhause stress (Mpa) Electrical power (Kw) Outlet pipe size Dimensions (mm)
LGDY 37 6.3/5.6/4.eight .8/1./1.three 37 2-G1 1-G2 2210*1900*1420
LGDY forty five seven.5/6.8/5.eight .8/1./1.3 45 2-G1 1-G2 2850*1520*1500
LGDY 55 nine.8/8.8/7.2 .8/1./1.3 fifty five two-G1 1-G2 2500*1905*1840
LGDY 75 12.3/eleven./9. .8/1./1.3 seventy five 2-G1 1-G2 2500*1905*1840
LGDY 90 15.6/14.2/11.five .8/1./1.3 ninety two-G1 1-G2 2640*1550*1860
LGDY one hundred ten twenty./seventeen.5/fourteen.five .8/1./1.3 a hundred and ten two-G1 1-G2 3550*1740*2100
LGDY 132 23/21/18.1 .8/1./1.3 132 2-G1 1-G2 3550*1740*2100
LGDY a hundred and sixty 27.1/25.2/21.2 .8/1./1.three a hundred and sixty 2-G1 1-G2 3870*1820*2200
LGDY two hundred 33.3/thirty.6/26.3 .8/1./1.three two hundred two-G1 1-G2 4100*2050*2300

Our manufacturing facility and workshop:


Following sales service:
one. Delivering expert air compression program planning for free of charge.
2. Supplying our factory first equipment components at cheapest price tag right after device sales.
three. Offering instruction and guidance for cost-free, buyers can deliver their staff to our factory to find out how to work the machines.
four. Warranty period of time: the screw main machine is 1 year, the bearing is 1 year, the wear areas of air ingestion valve, electric factors, electromagnetic valve, price valve are 6 months
5. The air filter, oil filter, oil-drinking water separator, lubricating oil, rubber areas and and so forth. are not provided in warranty assortment.

Certification and patents of our air compressor


Q1: Are you factory or trade organization?  
A1: We are manufacturing unit.
Q2: Warranty terms of your machine? 
A2: One yr warranty for the device and technical assist according to your needs.
Q3: Will you offer some spare components of the equipment? 
A3: Yes, of course.
This fall: How prolonged will you take to set up production? 
A4: 380V 50HZ we can shipping the goods within twenty days. Other electrical power or other coloration we will shipping and delivery within 30 days.
Q5: Can you accept OEM orders? 
A5: Yes, with professional design team, OEM orders are highly welcome!

Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type
Type: Twin-Screw Compressor


Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.


Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.


A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.


The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.


The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China Portable  Air Cooler Compressor     lowes air compressorChina Portable  Air Cooler Compressor     lowes air compressor
editor by CX 2023-04-12