Merchandise Description

Scope of application:
Utilizing for Pushing Pneumatic Nail Gun, Air Screw , Spray Portray Gun to work, also use to miniature instrument, blowing dust, Air inflation for modest automobile and so on.
Product  Function:

  1. Large Electricity, large effectiveness, lower strength, large reliability.
  2. Piston Ring: New ECO circle, reduced friction coefficient, Car lubricating method.
  3. Cylinder Liner: Floor hardening, deplete hardness, Accelerate the warmth transfer, long making use of time.
  4. Suction and exhaust valve: Utilizing innovative overseas engineering.
  5. Several Stress: Overload protection

 

  

 

 

 

 

  

 Oilless Air Compressor Featuers:
1.Super Silent
Tremendous low sound.The output air strain is steady with out fluctuations, lowering sounds pollution.
   
     2. Safety
 
If the voltage or current trigger the machine  overheat, it will automatically shut down to defend  from burnout.
 
    3. Computerized management

 Pressure switch instantly controls the commence and end of the device.
   
   4. Adjustable air pressure
The air strain can be modified to fulfill the demands of distinct equipment usage.

   5. Conserve human power
 
Switch on the air compressor can function normally & instantly. It is effortless to run and does not need to have human to be on duty.
 
 6. Straightforward upkeep
No need to incorporate any lubricant, straightforward upkeep after buy. 

Areas Features
1.Hefty solid iron entire body: hefty load, lengthy stroke, reduced fuel intake, reduced sound

two.Cylinder: produced of substantial-quality forged iron, energy, excellent lubricity, wall by the fantastic honing, use-resistant, sturdy

3.Piston ring: very good elasticity, excellent wear resistance, reduced oil usage, not straightforward to make the valve team carbon deposition and loss of oil to burn the crankshaft and connecting rod.

4.The crankshaft, connecting rod, piston: well well balanced, wear resistance, large strength, easy working balance.

5.High dependable and tough valve robust aluminum alloy body, gentle and warmth.

6.The motor supplies dependable energy, lower voltage start up and managing performance strong enthusiast cooled motor and human body unique shock evidence design and style.

seven.Double nozzles, have been utilised to immediate the exhaust and force exhaust pressure change with push button, protected and practical

eight.Oil free,silent,safeguard-surroundings,appropriate for dental use.
 

Frequency Requested Concern

one.Are you the manufacturer or investing business?
We are the company.

2.The place is your manufacturing unit?
It is found in HangZhou City,ZHangZhoug Province,China.

3.What is actually the phrases of trade?
FOB,CFR,CIF or EXW are all satisfactory.

4.What’s the phrases of payment?
T/T,L/C at sight or money.

five.What’s the direct time?

In fifteen days on receipt of deposit .

six.Do you settle for sample get?
Indeed,we acknowledge.

7.What about the expense of sample?
 You have to shell out the freight cost.But the expense of item could be refundable,if you will buy 1x20GP container in the long term.

Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical
Structure Type: Open Type
Compress Level: Double-Stage

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical
Structure Type: Open Type
Compress Level: Double-Stage

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Kompresor Udara Part Screw Oilless High Pressure Parts Portable Industrial Rotary Used Car Mini Single Movable Max Dental AC Piston Air Pump Compressor     manufacturer China Kompresor Udara Part Screw Oilless High Pressure Parts Portable Industrial Rotary Used Car Mini Single Movable Max Dental AC Piston Air Pump Compressor     manufacturer
editor by czh 2023-01-12