Product Description

Product Description

Medium voltage permanent magnet variable frequency screw compressor

HY(V)-Z  Working pressure Capacity Power Noise Air outlet Net weight
bar psig (m3/min) cfm kW hp dB Pipe diameter  
HYV-55Z 20 291 3.8-6.4 134-226 55 75 67±3 DN32 2200
25 364 3.6-6.0 127-212 55 75 67±3 DN32 2200
30 437 3.1-5.2 109-184 55 75 67±3 DN32 2200
35 510 2.6-4.3 92-152 55 75 67±3 DN32 2200
40 583 2.3-3.8 81-134 55 75 67±3 DN32 2200
HYV-75Z 20 291 4.6-7.7 162-272 75 100 68±3 DN32 2400
25 364 4.5-7.5 159-265 75 100 68±3 DN32 2400
30 437 4.0-6.7 141-237 75 100 68±3 DN32 2400
35 510 3.8-6.3 134-222 75 100 68±3 DN32 2400
40 583 3.0-5.0 106-177 75 100 68±3 DN32 2400
HY-90Z 20 291 6.7-11.2 237-396 90 120 70±3 DN32 2800
25 364 6.2-10.3 219-364 90 120 70±3 DN32 2800
30 437 6.0-10.0 212-353 90 120 70±3 DN32 2800
35 510 4.1-6.8 145-240 90 120 70±3 DN32 2800
40 583 3.8-6.3 134-222 90 120 70±3 DN32 2800
HYV-110Z 20 291 8.2-13.6 290-480 110 150 72±3 DN40 3100
25 364 7.5-12.5 265-441 110 150 72±3 DN40 3100
30 437 6.5-10.8 230-381 110 150 72±3 DN40 3100
35 510 5.8-9.6 205-339 110 150 72±3 DN40 3100
40 583 5.5-9.1 194-321 110 150 72±3 DN40 3100
HYV-132Z 20 291 10.1-16.8 357-593 132 175 74±3 DN40 3300
25 364 9.0-15.0 318-530 132 175 74±3 DN40 3300
30 437 7.9-13.1 279-463 132 175 74±3 DN40 3300
35 510 7.1-11.8 251-417 132 175 74±3 DN40 3300
40 583 6.8-11.3 240-399 132 175 74±3 DN40 3300
HYV-160Z 20 291 9.6-16.0 339-565 160 215 75±3 DN50 3800
25 364 10.0-16.6 353-586 160 215 75±3 DN50 3800
30 437 9.8-16.3 346-576 160 215 75±3 DN40 3700
35 510 9.4-15.6 332-551 160 215 75±3 DN50 3800
40 583 8.3-13.8 293-487 160 215 75±3 DN40 3700
HYV-185Z 20 291 14.1-23.5 498-830 185 250 76±3 DN50 4000
25 364 11.7-19.5 413-689 185 250 76±3 DN50 4000
HYV-200Z 20 291 15.6-26.0 551-918 200 270 76±3 DN50 4200
25 364 13.7-22.9 484-809 200 270 76±3 DN50 4200
30 437 13.3-22.2 470-784 200 270 76±3 DN50 4200
HYV-220ZW 20 291 17.8-29.7 629-1049 220 300 78±3 DN65 5000
25 364 15.5-25.8 547-911 220 300 78±3 DN65 5000
30 437 13.9-23.2 491-819 220 300 78±3 DN65 5000
35 510 13.2-22.0 565-777 220 300 78±3 DN65 5000
40 583 12.2-20.3 431-717 220 300 78±3 DN65 5000
HYV-250ZW 20 291 20.5-34.2 724-1208 250 350 78±3 DN65 5700
25 364 17.5-29.1 618-1571 250 350 78±3 DN65 5700
30 437 16.5-27.5 583-971 250 350 78±3 DN65 5700
35 510 15.1-25.2 533-890 250 350 78±3 DN65 5700
40 583 13.7-22.8 484-805 250 350 78±3 DN65 5700
HYV-280ZW 20 291 22.6-37.7 798-1331 280 375 80±3 DN65 6000
25 364 20.4-34.0 720-1201 280 375 80±3 DN65 6000
30 437 18.0-30.0 636-1059 280 375 80±3 DN65 6000
35 510 16.4-27.3 579-964 280 375 80±3 DN65 6000
40 583 15.0-25.0 530-883 280 375 80±3 DN65 6500

 Picture Display

The advantage of screw air compressor

Company strength display

HangZhou CZPT Gas Equipment Co., Ltd. is a manufacturer engaged in the research and development, design and production of gas compressors. The company has its own production technology, processing equipment and assembly technology, and has many years of experience in the production of various flammable and explosive special gas compressors.

Huayan compressor products cover almost all gas media, up to 6th-stage compression and 3000kw power. Products can be customized according to customer requirements to better meet customer needs. The products are mainly used in gas compressors in the petroleum industry, chemical and natural gas compressors, industrial compressors, compressors for waste gas treatment and biogas utilization, and compressors for special gases.


After Sales Service
1.Quick response within 2 to 8 hours, with a reaction rate exceeding 98%;
2. 24-hour telephone service, please feel free to contact us;
3. The whole machine is guaranteed for 1 year (excluding pipelines and human factors);
4. Provide consulting service for the service life of the whole machine, and provide 24-hour technical support via email;
5. On-site installation and commissioning by our experienced technicians;

Exhibition Display


Certificate display
Packaging and Shipping



Q1: What is the rotor speed for the air end?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).

Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.

Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.


After-sales Service: Provide After-Sell Sevice
Warranty: 18monthes
Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Position: Vertical
Structure Type: Closed Type



Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.


Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.


A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.


The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.


The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China factory Inverter Permanent Magnet Screw Air Compressor for Blowing and Filling Bottles and Painting   best air compressorChina factory Inverter Permanent Magnet Screw Air Compressor for Blowing and Filling Bottles and Painting   best air compressor
editor by CX 2023-04-21